Nonwoven Fabric, nonwoven Wall Cloth Construction Method

Nonwoven wallpaper is a kind of high - grade wallpaper. Because it is made of natural plant fiber non woven technology, it has stronger tensile force and is more environmentally friendly. It is not moldy or yellow. Good air permeability is the main substrate of high - quality wallpaper. Non woven fabric roll is the latest and most environmentally friendly materials. Because it uses a nonwoven process in textiles, it is also called non woven fabric, but it should be called nonwoven paper to be exact.

Construction Method:

1. Since the wall cloth itself will absorb water, the glue should be thickly prepared to reduce the flow. Appropriate amount of white glue should also be added to the glue to increase the adhesion and glue directly on the wall.

2. Don't  use hard board or nylon brush. Use a soft brush to scrape from top to bottom. The wallpaper is attached to the wall.

3. Keep your hands clean, carefully apply glue, and do not contaminate the surface of the wall covering.

4. before the paste, should be used on the edge of the wall cloth with a double - sided tape to a length. Lengthen the width of the wall cloth, so as to avoid the edge of the wall cloth is contaminated by glue.

5. In case the surface of the wall covering is contaminated, only one unit of the pollution can be cut according to the width.

6. Use a brush to gently remove the air bubbles. Do not use too much force to avoid damaging the fabric of the wall covering. Especially when applying the wall covering of the yarn, pay special attention to the air bubbles near the seam. The glue should not overflow.

7. Avoid overlapping the wall covering at the corner of the corner, and do not cut the wall covering at the corner of the corner to avoid causing the edge of the wall at the corner.

8. If there is dust on the surface, apply a soft brush or tweezers. Do not use a wet towel to wipe the stain to enlarge.